Bona Bona Belt AMO110000.3 Скачать руководство пользователя страница 5

Страница: 5 / 32

Machine Symbols Key

Read the instructions

contained in this user

and maintenance manual

before using the machine.

Hearing protection during

use is recommended.

Protection of the airways

during use

is recommended.

Hazard due to

moving parts.

Hazard due

to electricity.

HAZARD

means: Serious injury or death may occur to the operator or others if 'HAZARD' warnings on the

machine or in this manual are ignored or not kept to. Read and follow all 'HAZARD' warnings on this machine

or in this manual.

WARNING

means: Injury may occur to the operator or others if 'WARNING' notices on the machine or in this

manual are ignored or not kept to. Read and follow all 'WARNING' notices on this machine or in this manual.

CAUTION

means: Damage may occur to the operator or others if 'CAUTION' alerts on the machine or in this

manual are ignored or not kept to. Read and follow all 'CAUTION' alerts on this machine or in this manual.

Operator Safety

Failure to read the Bona Edge machine manual before operating, adjusting or performing maintenance

operations on the machine could cause injury or damage to persons or objects.

Anyone operating the machine should understand how to use and operate it before starting it up.

KEEP AWAY FROM CHILDREN

Children should be supervised to ensure that they do not play with the appliance. This machine is not

intended for use by persons (including children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge unless they have received instructions regarding the use and are

supervised by a person responsible for their safety.

Содержание Bona Belt AMO110000.3

































Результаты поиска

Содержание Bona Belt AMO110000.3

Отзывы:

Похожие инструкции для Bona Belt AMO110000.3

Бренды по названию

Популярные бренды

Bona Bona Belt AMO110000.3, Руководство по эксплуатации

Результаты поиска

Содержание Bona Belt AMO110000.3

Отзывы:

Похожие инструкции для Bona Belt AMO110000.3

Бренды по названию

Популярные бренды