page 21
Rev. A, 03/04
Flydat status
Flydat status
Flydat Operator's manual
The
can be programmed by an authorized
dealer for different Warning and Alarm limits, depending
on the engine type.
Distinguish three ranges of the status:
Fly
dat
c
c
c
green range
yellow range
red range
(standard operation)
All readings are below or above (min. oil pressure)
the programmed Warning limits.
(exceeding of Warn limits)
If one or more readings exceed the programmed Warning
limit, then the reading shows flashing on the display, and
simultaneously the control lamps are flashing and the alarm
output is periodically (0,5sec.) switching on and off, until
(exceeding of Alarm limits)
If one or more readings exceed the programmed Alarm limit,
then the reading shows flashing on the display, and
simultaneously the control lamps are flashing and the alarm
output is periodically (0,5sec.) switching on and off, until
the limit stops to be exceeded.
the limit stops to be exceeded.
WARNING:
NOTE:
dat
Ignoring of the Warning and Alarm signal
may cause injures or endanger the life
of the operator or the third party.
The reading operation of the
remains active, even when exceeding
the limits, as long as it is supplied with
the required voltage.
The control of the limits responds if the
pick-up readings are at or above or below
(oil pressure) the programmed limits.
FLY
®
14
Section
