page 20
Rev. A, 03/04
Possible display
Possible display
Flydat Operator's manual
Indication of engine speed
The r.p.m. reading is in 4 digits and shows on the display
from 300 r.p.m. onwards. Recording of the speed down to
1000 r.p.m. ending with last input memory.
is capable of total running time
of up to 9999,9 hours.
The number of operating hours is in 4 digits with the
resolution of 0,1 hour on the display.
As only 4 digits are at disposal, the time of operation is indicated
up to 999,9 hours followed by starting at 0,0 hours again.
Recording of the time of operation is at the engine speed down
to 1000 r.p.m.
The
NOTE: If the rotation speed has exceeded the value of
9999r.p.m., three dashes
will show on
the display.
NOTE:
dat
[ - - - ]
Indication of operating time
FLY
®
13
Section
Temperature indication
Indication of oil pressure
(Exhaust gas, cylinder head, oil and air temperature)
The temperature display is in 3 digits with the resolution
to 1°C or 10°F.
(On engine 912, 912S and 914 only)
Display of the oil pressure is in 3 digits with a resolution
of 0,1 bar. The oil pressure gauge is furnished, besides the
generally fitted max. limit control, additionally with the
minimum pressure control.
The control of the minimum oil pressure is linked to the
circuit 5 sec. after (for physical reasons) reaching the
engine speed of at least 1000 r.p.m.
The control of the max. oil pressure is without a time-delay.
NOTE: As stated previously in configuration, the
temperature indication is either in °C or °F.
As only 3 digits are at disposal, the indication
of the exhaust gas temperature in °F shows
only 1/10 of its actual value on the display,
i.e. indication °F x 10 = actual exhaust gas temp.
