Activate
all valves
into inflation
position.
Fit the hose to the foot-pump_
To inflate
your boat properly,
the bottom
side of the toot-pump
must rest on a lIat ground.
Pump evenly to inflate rapidly.
A
WARNING
1. Inflate
with gear lever in position
(!) then ~
until it becomes
diflicult
to operate.
2. Finish
inllation
in position
®
until you reach correct
pressure
(800 mb)
&
CAUTION
NEVER
USE POSITION
®
TO INFLATE
THE MAIN TUBE. THERE
WOULD
BE A RISK OF BURST.
Inflate the main buoyancy
tube first with gear lever in position
(!) until it becomes
difficult
to operate,
then put the gear lever to position
~,
and inflate to correct
pressure
(=
240 mb/3,48
PSI, reefer to
PRESSURE
section)
making sure that each compartment
is equal. When correctly
inflated, the
compartments
bulkheads
(a) are not visible.
••
NEVER COMPLETELY
INFLATE
A
COMPARTMENT
TO FULL
PRESSURE
IF OTHER
COMPARTMENTS
ARE
TOTALLY
DEFLATED
I
••
I
I ••
I,
A slight air-leak before screwing
the valve caps is normal.
ONLY THE VALVE
CAPS CAN ENSURE
FINAL AIR TIGHTNESS.
