manualshive.com logo in svg

Bomag BPR 50, Руководство по эксплуатации

Поделиться
Скачать
Bomag BPR 50 Скачать руководство пользователя страница 68

6.9  Annual maintenance

6.9.1  Changing the engine oil and cleaning the oil filter

Change the engine oil at the latest after 250 operating

hours.

NOTICE!
Danger of engine damage!

–

Change the oil only with the engine at operating

temperature.

–

Use only oil of the permitted specifica-

tion

Ä

 Chapter 6.2.1 ‘Engine oil’ on page 50

.

–

Filling quantity: 

Ä

 Chapter 6.3 ‘Table of fuels and

lubricants’ on page 53

Protective equipment:

n

Working clothes

n

Protective gloves

n

Safety goggles

Park the machine in secured condition.

Clean the area around the dipstick and pull the dipstick out.

Clean the area around the drain hose.

Loosen the hose clamp (1) and route the drain hose to the

outside.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective outfit (protec-

tive gloves, protective clothing).

Unscrew the oil drain plug (2) and catch any oil running out.

Clean the drain plug and screw it back in.

Assemble the drain hose with the hose clamp.

Draining off engine oil

Fig.  59

Maintenance – Annual maintenance

 

BPR 50/55 D / BPR 60/65 D

 

68

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BPR 50


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды