6.1 General notes on maintenance
When performing maintenance work ensure strict compliance with
the respective safety instructions and particularly the safety regula-
tions mentioned in the corresponding section of these operating
and maintenance instructions.
Thorough maintenance of the machine guarantees far longer safe
functioning of the machine and prolongs the lifetime of important
components. The effort needed for this work is only little compared
with the problems that may arise when not observing this rule.
Always clean machine and engine thoroughly before starting
maintenance work.
For maintenance work stand the machine on level ground.
Do not touch hot engine parts.
Perform maintenance work only with the engine shut down.
ENVIRONMENT!
During maintenance work catch all oils and fuels and
do not let them seep into the ground or into the
sewage system. Dispose of oils and fuels environmen-
tally.
Keep used filters in a separate waste container and
dispose of environmentally.
Open the hood to perform maintenance work.
Loosen the hood fasteners (1) on both sides and remove the
fasteners (2) from both sides
Fold the hood back.
The lifetime of the diesel engine depends to a great extent on the
cleanliness of the fuel.
Keep fuel free of contaminants and water, since this will
damage the injection elements of the engine.
Drums with inside zinc lining are not suitable to store fuel.
Fig. 38
Notes on the fuel system
Maintenance – General notes on maintenance
BPR 50/55 D / BPR 60/65 D
48
Go
to
Discount-Equipment.com
to
order
your
parts
