0DLQWHQDQFHHYHU\PRQWKV
%20$*
35
BPR 25/32 - BPR 25/40
Maintenance every 6 m onths
4.12 Changing the engine oil
Danger
Danger of scalding!
When draining hot engine oil.
Caution
Environmental damage!
Catch old oil and dispose of environmentally.
L
Note
Drain the engine oil only when the engine is warm.
Park the machine on level ground so that the en-
gine is in horizontal position.
Observe information concerning fuels and lubri-
cants.
Fig. 33
●
Tilt the machine towards the steering handle.
●
Support the machine safely.
●
Unscrew the oil filler cap 1 (Fig. 33).
●
Unscrew oil drain plug (2) and catch running
out old oil.
●
Clean the drain plug and turn it in with a new
seal ring (3).
Fig. 34
●
Adjust the engine horizontally.
●
Fill in new engine oil through the filler opening
(Fig. 34).
For quality and quantity of oil refer to the table
of fuels and lubricants.
●
Screw the oil filler plug in.
●
Check the oil level again after running the en-
gine for approx. 1 minute.
●
The oil level must reach up to the bottom edge
of the oil filler neck.
●
If the oil is below this level top up oil immedi-
ately.
Go
to
Discount-Equipment.com
to
order
your
parts
