Bomag BPR 25/32 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 49

background image

6DIHW\UHJXODWLRQV

%20$*

14

BPR 25/32 - BPR 25/40

General notes

This BOMAG machine has been built in ac-
cording to the latest technical standard and
complies with the applicable regulations and
technical rules. However, dangers for persons
and property may arise from this machine, if:

●

it is used for purposes other than the ones it is
intended for

●

it is operated by untrained personnel

●

it is changed or converted in an unprofessional
way

●

the safety instructions are not observed

Each person involved in the operation, mainte-
nance and repair of the machine must there-
fore read and comply with these safety
regulations. If necessary, this must be con-
firmed by obtaining the signature of the cus-
tomer.

Furthermore, the following instructions and regula-
tions must obviously also be complied with:

●

applicable accident prevention regulations

●

generally accepted safety and road traffic reg-
ulations

●

regulations specific for a country

Intended use

This machine must only be used for:

●

the compaction of all types of soil

●

repair work on all types of soil

●

enforcement of paths and walkways

●

work in trenches

●

backfills and compaction of hard shoulders

Unintended use

However, dangers may arise from this machine if
it is operated by untrained personnel or if it is sub-
ject of unintended use.

Who has permission to operate the ma-
chine?

Only trained and instructed persons of at least 18
years of age are permitted to drive and operate
this machine. For operation of the machine the re-

sponsibilities must be clearly specified and com-
plied with.

Persons under the influence of alcohol, medicine
or drugs are not allowed to operate, service or re-
pair the machine.

Conversions and changes to the ma-
chine

For safety reasons unauthorized changes to the
machine are not allowed.

Original parts and accessories have been special-
ly designed for this machine. We wish to make ex-
plicitly clear that we have not tested or approved
any parts or accessories not supplied by us. The
installation and/or use of such products may have
an adverse effect on the active and/or passive
driving safety. The manufacturer explicitly ex-
cludes any liability for damage caused by the use
of non-original parts or accessories.

Notes on safety in the operating and
maintenance instructions:

Danger

Paragraphs marked like this highlight possible
dangers for persons.

Caution

Paragraphs marked like this highlight possible
dangers for machines or parts of the machine.

L

Note

Paragraphs marked like this contain technical in-
formation for the optimal economical use of the
machine.

Safety stickers on the machine

Keep safety stickers in good condition and legible
and follow their meaning.

Replace damaged and illegible safety stickers.

Loading the machine

Secure the machine against turning over or slip-
ping off.

Persons are highly endagered if they

Go

to

Discount-Equipment.com

to

order

your

parts

«
...
12
13
14
15
16
...
»

Содержание BPR 25/32


















































Отзывы:

Нет отзывов

Похожие инструкции для BPR 25/32

Бренд: Vector Страницы: 6

Бренд: National Flooring Equipment Страницы: 23

Бренд: Jet Страницы: 14

Бренд: Kärcher Страницы: 148

Бренд: Keithley Страницы: 10

Бренд: MACROZA Страницы: 13

Бренд: Van's Aircraft Страницы: 217

Бренд: KAKA Industrial Страницы: 8

Бренд: tacwise Страницы: 12

Бренд: NSI Solutions Страницы: 10

Бренд: Performance Tool Страницы: 6

Бренд: Agilent Technologies Страницы: 142

Бренд: VOLTCRAFT Страницы: 8

Бренд: Parkside Страницы: 88

Бренд: OEM Tools Страницы: 4

MAG-8200 Series

Бренд: Magna-Matic Страницы: 10

Бренд: VONROC Страницы: 84

Millipore mA700

Бренд: Merck Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды