Boltek LD-250, Инструкция по установке и эксплуатации

Страница: 16 / 23

I N S T A L L A T I O N
13
Installing the USB Adapter Cable:
With your computer turned on plug the USB adapter cable into a spare USB port on your
computer or hub. USB devices may be plugged and unplugged with the power on.
Windows will detect the new device and install the drivers automatically.
If the computer does not have internet access, Place the USB Drivers CDROM in your
computer disk drive. Open Windows File Explorer and copy the setup.exe file from the
CDROM to your local hard drive then run the setup executable.
If the Windows Security prompt appears, click accept to continue driver installation. Once
the drivers have finished installing the following window will appear.
Click OK button to complete the installation procedure, then plug in the USB-RS232
adapter. Refer back to your Windows Device Manager to view the virtual com port
assigned to the adapter.