28
|
Controlling Flash Coverage (Zoom)
When the flash zoom setting is adjusted, the reflectors inside the flash head shift position in order to widen or
narrow the angle of coverage.
Automatic zoom control:
In automatic zoom mode, when you zoom in with your camera lens, the flash will
automatically adjust to match the lens focal length, and the LCD will display the closest zoom setting. The
available range is between 24mm and 180mm.
To enable automatic zoom control, press the ZOOM button, and then press the down navigation button so the
manual zoom mode indicator on the LCD disappears. Press the ZOOM button again to confirm your selection.
Press the shutter-release button on your camera halfway to initiate communication between the camera and
the flash, and the flash zoom setting will change automatically.
Note:
Older cameras that do not offer digital data transmission with the flash do not support the automatic
flash zoom control. The manual zoom control must then be used.
