Controlling Flash Coverage (Zoom)
|
27
Note:
When decreasing the flash output in increments of one-third from one setting to a lower s 0.3
or 0.7, you will need to decrease it to the next lowest setting, and then fine-tune it up. For example, when
decreasing from 1/4 to 1/8 + 0.7, you will need to decrease to 1/8, and then increase to 1/8 + 0.7.
When setting exposure settings on your camera, the highest shutter speed available will be your camera’s
flash sync speed.
Tip:
For best results, use a handheld light meter when shooting in manual flash mode.
Controlling Flash Coverage (Zoom)
The VX-710C’s angle of coverage can be adjusted, or zoomed, to match the focal length of your lens, so that
your image is evenly illuminated from edge to edge.
