Using Flash Exposure Bracketing
|
25
2. Press the SUB button repeatedly until the FEB icon blinks. Use
the left and right navigation buttons to adjust the FEB value, and
the up and down navigation buttons to fine-tune. Press the SUB
button again to confirm your selection.
3. Use the left and right navigation buttons to set the flash
exposure compensation, and the up and down navigation
buttons to fine-tune.
To turn off flash exposure
compensation, set the FEB value
to 0 and press the SUB button to
confirm your selection.
Note:
The LCD will display 1b
after the first shot, and 2b after
the second shot. As always, the
flash exposure compensation will appear on the LCD before each shot. Flash exposure bracketing turns off
automatically after you fire three shots.
Important!
Make sure your flash is recycled and ready before taking each shot.
Zoom
ISO
Zoom
ISO
Zoom
ISO
3
2
NOTE
