Bolin Technology SD5SN-M-10162017, Руководство пользователя

Страница: 4 / 27

4
Safety Information
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read
all of the Safety Instructions supplied with your equipment before installation and operation.
Warnings:

If the product does not work properly, please contact your dealer. Never attempt to disassemble the camera
yourself. (We will not assume any responsibility for problems caused by unauthorized repair or maintenance.)

This installation should be made by a qualified service person and should conform to all the local codes.

When shipping, the camera should be packed in its original packaging.

Make sure the power supply voltage is correct before using the camera.

Do not drop the camera or subject it to physical shock.

Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and
wipe it gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the
sensor from dirt.

Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong light can cause
fatal damage to the camera.
Maintenance Precautions:

If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a rubber dust
blowing ball.

If there is grease or a dust stain on the front glass surface, clean the glass surface gently from the center
outward using anti-static gloves or an oil-free cloth. If the grease or the stain still cannot be removed, use
anti-static gloves or an oil-free cloth dipped with detergent and clean the glass surface gently until it is
removed.

Do not use organic solvents, such as benzene or ethanol when cleaning the front glass surface.
Regulatory Compliance
FCC Part 15
This equipment has been tested and found to comply with the limits for digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive
2004/108/EC.
WEEE Directive
–2002/96/EC
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment
(WEEE) Directive and must be disposed of in a responsible manner.