Bolin Technology SD5SN-M-10162017, Руководство пользователя

Страница: 18 / 27

18
FACTORY DEFAULT:
The menu is used to restore the factory settings.
DISPLAY CONFIGURATION:
Entered the menu of DISPLAY CONFIGURATION, it will be shown the below
items:
ZOOM LENSPOSITION:
Select ON to display the zoom lens position on the screen.
DIRECTION INDICATOR:
Select ON to display the direction indicator on the screen.
INTERFACE SET:
This menu is used to set the following parameters:
CAMERA ID:
Factory Default Setting: 001
Use RS485 Pelco-D can control up to 255 cameras, camera ID from 001 to
255 has to be set.
Use RS422 VISCA protocol can control up to 7 cameras, camera ID from 1 to
7 has to be set.
BAUD RATE:
Factory Default Setting: 9600,
Select the baud rate from the following: 2400, 4800, 9600, 38400bps.
NOTE!

After the camera ID and Baud rate is set, to activate the new set camera ID and Baud rate, the camera has
to be rebooted by powering the camera OFF and ON.

For Dual-Output camera, the camera ID and Baud rate on IP web interface has to be set to the same ID as
the camera’s for IP control. (See user manual Part Two)

You may need to reboot the keyboard after you change the camera ID and Baud rate.

Once modified and saved the camera ID and baud rate, please modify the corresponding parameters on
both the keyboard and IP web interface setting, otherwise the camera and keyboard and IP control will be
unable to communicate.
FLIP:
Select ON to flip the image if you need to lift the camera.
VIDEO FORMAT:
SDI + IP True Dual Output: You can have parallel SDI and IP video output. Either SDI or IP video format can be
set up independently for having dual output simultaneously.

SDI output: Select the SDI video output format from the following:
B Class models: 1080P: 60/59.94/50/30/29.97/25; 1080I:60/59.94/50; 720P: 60/50/30/25.
S Class models: 1080P: 60/50/30/25; 720P: 60/50/30/25.

IP output: Select the IP video output format from the following: 1080P:30/25, 720P:30/25
Follow the steps to change the video format:
1. Set SDI video resolution in SYSTEM SETUP.
2. Select the SDI VIDEO format you want to have from 1080P: 60/59.94/50/30/29.97/25; 1080I:60/59.94/50;
720P: 60/50/30/25.
3. Waiting for a while for camera new set video format being taken. It is normal that you cannot take the
control of the interface while the video format is being changed. You can reboot the camera by powering
OFF and ON to active the new set video format if it takes too long to complete the format changing by
itself.
4. Go to IP camera Web Interface (Refer to PART TWO-Network Cameras User Manual), you can set IP
video resolution to following: 1080P30, 1080P25, 720P30, 720P25.
FACTORY DEFAULT
DISPLAY CONFIGURATION
> INTERFACE SET
FLIP: OFF
SDI VIDEO: 1080P30
IP VIDEO: 1080P
VIDEO FARMAT: 1080P30
PROPORTIONAL PT: ON
SET NORIH
SYSTEM INFO
SYSTEM RESET
EXIT
CAMERA ID: 001
BAUD RATE: 9600
EXIT