XF-300 Series High Volume Fume extraction systems
Bokar International www.bokar.com,
, www.ZeroCharge.net
Page 7 of 11
III. PACKAGING
There are two boxes. One contains the system and the second one, one or two arms.
XF-301
XF-302
Box #1
1.
XF-300
– Base with XF-300-CF combined
filter, pre-filter
2. Power cord
3. Manual
4. Guarantee card
Box #2
1.
XF-A75ESD
– 75 mm ESD Arm with Funnel
Box #1
1.
XF-300
– Base with XF-300 CF combined
filter, pre-filter
2. Power cord
3. Manual
4. Guarantee card
Box #2
1. Two
XF-A75ESD
– 75 mm ESD Arm with
Funnel
XF-301H
XF-302H
Box #1
1.
XF-300
– Base with XF-300-HF HEPA/Gas
filter, pre-filter
2. Power cord
3. Manual
4. Guarantee card
Box #2
1.
XF-A75ESD
– 75 mm ESD Arm with Funnel
Box #1
1.
XF-300
– Base with XF-300-HF HEPA/Gas
filter, pre-filter
2. Power cord
3. Manual
4. Guarantee card
Box #2
1. Two
XF-A75ESD
– 75 mm ESD Arm with
Funnel
IV. UNPACKING
Prior to use of the system, please check if the system is complete. Should you notice that any items
are missing, please notify us, giving the details of model number, voltage, date of purchase, where
purchased and what is missing. Missing items must be reported within 7 days from the date of purchase.
WARNING
When unpacking, please be careful and read the manual prior to turning the system
“ON”. Please check that the voltage of the System corresponds with the voltage of
your available supply. Connection to incorrect voltage supply may cause damage to
the System!
V. SET-UP AND INSTALLATION
PLACEMENT
Three major considerations need to be addressed for proper placement of the central filtration unit.
•
Exhaust Port: The exhaust port is located on the bottom of the filtration unit, next to the on/off switch.
When positioning the unit, make sure that the exhaust port is not blocked or that airflow from the
exhaust port is not restricted in any way. Additionally, the on/off switch (located on the back of the
filtration unit) must be readily accessible.
•
Unit Location: The filtration unit should be located so that it will not block aisleways or impede normal
operating traffic or material handling pathways. It is important to position the unit in such a way that
allows for proper clearance to remove the filter access cover and replace the filter as needed.
