0012 00
BOH-PM-13-2
Chapter 2 Rev. 0.01
0012 00-1
OPERATOR INSTRUCTIONS
FPU
®
SYSTEMS OPERATION MANUAL
BOH OFFICE MODULE
(INCLUDING REPAIR PARTS & SPECIAL TOOL LIST)
BOH FPU Field Pack-up Units
OPERATION UNDER UNUSUAL CONDITIONS
INITIAL SETUP:
Office Module Downloaded, Storage and Setup
Maintenance Level
Personnel Required
Operator/Crew
Two (plus one supervisor)
OPERATION UNDER UNUSUAL CONDITIONS
This work package provides instructions for the operation of the Office Module under unusual conditions.
These include adverse weather, nuclear, biological and chemical attack, and emergency blackout
conditions.
Operation in Rain and/or Mud
1. Provide an adequate drainage ditch to prevent standing water around the Office Module.
2. Secure the office module during extremely harsh rain.
Operation in Extreme Hot or Cold Weather
1. Ensure the HVAC is properly serviced before deployment to extreme heat and cold conditions.
WARNING
In extreme heat or cold, do not touch metal parts with bare hands; wear appropriate
gloves. Failure to comply may result in severe skin damage.
Fording
The Office Module is not watertight. It should never be submerged in any depth of water or material
damage may result. When mounted on a trailer or truck, hard-bottom water crossings no deeper than
approximately two feet can be forded. When in doubt, refer to Unit Standard Operating Procedures.
