0010 00
BOH-PM-13-2
Chapter 2 Rev. 0.01
0010 00-6
OFFICE MODULE HVAC SYSTEM
The Office Module comes equipped with an 8,000 BTU HVAC unit located at the rear of the module
above the desktop. Refer to Operating Instructions and General Specs found in the Appendix for product
details.
HVAC Setup
1. Prior to pushing the HVAC into the extended position, first detach the vinyl cover (1) on the rear
exterior of the office module.
CAUTION
The HVAC unit must be extended in the “out” position before operating.
2. Push the HVAC evenly from the bottom pan (2) until the unit is fully extended outside.
CAUTION
When pushing the HVAC unit into the extended “out” position, push from the bottom pan. Do not push
directly against the HVAC plastic front as this may cause damage to the unit.
NOTE
Activated Red Lighting
Retracted HVAC Position
(Provided straps not shown)
