www.bofan.cc
-
19
Set Analog Voltage
(If your analog sensor max voltage is not 6V,
then you need to do this setting, to let tracker
know what is your sensor voltage
specification)
<password>
AV
<AD Port><min voltage of
sensor>,<max voltage of sensor>,24
AV=
A
nalog
V
oltage
AD Port=1 means AD1
=2 means AD2
=3 means AD3
=4 means AD4
Min voltage of sensor=input your sensor
min voltage at here
Max voltage of sensor=input your sensor
max voltage at here, it can’t be over the
max voltage of tracker support.
Shake Alarm
(or Move Alarm)
(PT600X with built-in motion sensor to
support this function.)
<password>
SKA
<index> SKA=
S
ha
k
e
A
larm
Index = 1, to send shake alarm SMS to
SOS number when PT600X
shakes
= 0, not to send shake alarm SMS to
SOS number when PT600X
shakes.
Define motion sensor sensitivity
<password>
MSS
<value> MSS=
M
otion
S
ensor
S
ensitivity
Value= number range is 1-15
Default set: 000000MSS3
(The larger value, the lower sensitivity)
Set char for alert SMS contents
<password>
ACH
<Alarm><Char> ACH=
A
larm
Ch
ar
Alarm=IN1, for input1 (SOS Alarm)
IN2, for input2
IN3, for input3
IN4, for input4
IN5, for input5
SPD, for over speed alarm
GEO, for geo-fence alarm
MLA, for Mileage Alarm
SKA, for shake alarm
For example
:
000000ACHIN4
Engine Start
it means PT600X will send a “
Engine Start
” SMS to SOS number when there is ignition on alarm.
Clear Saved data
<password>
CSV
CSV=
C
lear
S
a
v
ed data
Check previous command setting
<password>
ASK
<Command>
Examples:
000000ASKSVR, to check the server &
port what you set
000000ASKGID, to check the tracker ID
what you set
Basic GPRS setting for connecting device to server
(Ensure that your SIM card supports GPRS service)
Set ID
<password>
GID
<ID>
Tracker ID can’t exceed 10 digit