www.bofan.cc
-
15
If only set the 1st number, PT600X will
send SMS and then call to this first
number after pressing SOS button.
If set the 2nd or 3rd numbers too, PT600X
will send SMS to all 3 numbers, only call to
the 1
st
number after press SOS button.
Note:
<password>SOS,
command is for
cancel all pre set numbers.
Set Over Speed Alert
(When car speed is higher than the preset
value, PT600 will send an alert SMS to the
preset SOS number.)
<password>
SPD
<Max Speed>
SPD=
Sp
ee
d
Max Speed (the preset speed value)
=0 to turn off this function
=[0,500](unit: Km/h)
Example: 000000SPD80 it will send alert
when it is over 80Km/h
Set Geo-fence Alert
(When car leaves out or enters a preset
scope, PT600 will send one Geo-fence SMS
to the preset SOS number.)
<password>
GOF
<Type>,<SWLat>,<SWLn
g>,<NELat>,<NELng>
GOF=
G
e
o
-
F
ence
Type =1, alert when out of range
Type=2, alert when enter this range
SW=South-West
NE=North-East
Example
：
000000GOF0, to turn off this
function
Set Mileage Alert
(This Mileage Alert can be sent to your
mobile by SMS if you set your mobile number
as SOS number into this tracker installed in
car and it also can be sent to your email
address if you set your email address in
software successfully.)
<password>
MLA
<base
mileage>,<increment>
MLA=
M
i
l
e
a
ge (Unit: 100 meters)
Example: 000000MLA100000,50000
This example means, if the tracker records
the car driving more than 10000km,
tracker will send one Mileage Alert for
each 5000km mileage increments.
Set Odometer
<password>
SOD
SOD=
S
et
Od
ometer
（
unit: 100 meters
）
For example:
000000SOD
or
000000SOD0
it is to set the tracker’s odometer to be “0”
000000SOD100
it is to set the tracker’s odometer to be 10km.
(100*100meter=10000m=10km)
Command 000000SOD5000, it is to set the tracker’s odometer to be 500km.
(5000*100=500000m=500km)
Set time zone for tracker
(After setting time zone into tracker, you can
get your local time in tracker reply message.)
<password>
TMZ
<Time> TMZ=
T
i
m
e
Z
one
Time from -13 to 13
Example: 000000TMZ8