3
2. Product Information
The InSlide Out Hybridization Oven is designed so its sealed tray maintains a humid
condition for In-Situ Hybridization applications without the need to use sealed cover slips.
Uses include in-situ RNA amplification, reverse transcription reactions and hybridizations,
and immunohistochemical reactions.
The InSlide Out can hold up to twenty standard microscope slides on the standard wire
rack. An optional slide holder can hold up to eighteen standard microscope slides. The
unit has an advanced PID temperature controller that provides stable and accurate chamber
temperatures from ambient plus 10
˚C to 75˚C. The unit utilizes a sealed tray to create a
humid environment for overnight runs or weekend runs, depending on the operating
temperature.
3. Assembly
3.1 Unpacking
Remove packing materials carefully, and retain for future shipment or storage of the unit.
Inspect for damage. Report all shipping damage to the carrier immediately. Shipping
damage is covered by the carrier and repair/replacement for shipping damages must be
coordinated through the carrier. Complete and return the Warranty Registration Card.
Packs should contain:
•
In Slide Out Hybridization Oven
•
Power Line Cord
•
Operating Instructions
•
Tray Assembly (includes tray with gasket installed and lid)
•
Frame Assembly (held in place during shipping with corrugated spacer)
•
Wire Rack (shipped inside the Tray Assembly)
•
Filter Paper
3.2
Installation
Place the InSlide Out on a flat and stable surface, preferably away from drafts. Fit the
power line cord into the IEC power socket on the rear of the unit. Plug power cord into a
power supply that matches the voltage listed on the serial number label on the rear of the
unit.
4. Operation
4.1
Controls and Indicator Lamps (see Figure 1)
The Power Switch controls power to the unit.
The temperature display shows the chamber temperature in degrees Celsius.
