background image

 

 

   

19 

 

13.

 

The battery and the charger 

Battery 

 

The battery of the FreVAX™ is a rechargeable Lithium Ion (Li-Ion) battery. At least 1,000 injections can 

be administered by using a fully functioning and charged battery. 

The battery should be slotted into the opening in the base of the FreVAX™ device:  

  

 
 

A fastening button will hold the battery in position. The battery can be removed from the base by 

pushing down the button at the front of the battery and by pulling out the battery.  

 

Use only appropriate batteries in the FreVAX™. The use of other batteries can lead to injuries and 

fire hazard.  

 

Do not expose the battery to mechanical shocks.  

 

Stop using the battery if it becomes abnormally hot, or if discoloration, deformation or abnormal 

conditions are detected during use, charge or storage. 

 

Replace the battery when its running time between charges becomes much shorter than usual. 

 

It is recommended that batteries are not recharged before falling below 50% loading capacity. 

 

 

Never store empty batteries as this could damage them and make them unusable.

 

 

Never send/ ship defective batteries to any destination. Instead, please dispose of them correctly.

 

 

Charger 

 

Charge the battery using only the charger supplied. Connect the battery to the charger and connect 

the charger to an electric socket. When connected correctly,  the charging process will start 

automatically. 

 

Check the charger regularly for damage, especially the connection cable and the housing. Do not 

use damaged battery chargers.   

 

Always grasp the plug, not the cable, when removing the mains plug from the socket. 

 

Faulty electrical installation or too high mains voltage can lead to electric shock. Only connect the 

battery charger to an easily accessible socket, so that you can quickly disconnect it from the power 

supply in the event of fault.  

 

If you charge the battery improperly, the battery, battery charger and the FreVAX™ device may 

be damaged. Charge the battery at an ambient temperature between 0°C and 45°C.  

Содержание FreVAX 101
























Отзывы: