11
COMPUTER INSTRUCTION
FUNCTIONAL BUTTONS:
MODE
:
Push down for selecting functions.
SET
:
To Set the consumer movement of time
, d
istance
, c
alories and hand pulse.
RESET
:
For resetting consumer movement of time
,
distance
,
calories and hand pulse.
FUNCTION AND OPERATIONS:
SCAN:
Press
"
MODE
"
button until
"
SCAN
"
appears, monitor will rotate through all the 6
functions:
Time
, S
peed distance
, C
alorie
, O
dometer and
P
ulse. Each display will be h
e
ld
for
6
seconds.
TIME:
Count the total time from exercise start to end.
Press “MODE” button until “TIME” appears, press “SET” button to set exercise time. When
the “set” is zero, the computer will
beep for
10 seconds.
SPEED:
Display current speed.
DISTANCE:
Count the distance from exercise start to end.
Press “MODE” button until “DIST” appears. Press “SET” button to set exercise
distance. When the “set” is zero, the computer will
beep for
10 seconds.
CALORIES:
Count the total calories from exercise start to end.
Press “MODE” button unit “CAL” appears. Press “SET” button to set exercise
calories. When the “set” is zero, the computer will
beep
for
10 seconds.
ODOMETER
：
：
Monitor will display the total accumulated distance.
PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate, please
place your palms of your hands on Both of your contact pads and the monitor will show
your current heart beat rate in beats per minute(BPM) on the LCD after 6~7 seconds.
Remark:
During the process of pulse measurement, because of the contact jamming, the measurement
value may be higher than the virtual pulse rate during the first 2~3 seconds, then will return to
normal level. The measurement value can not be regarded as the basis of medical treatment.
Press “MODE” button until “PULSE” appears. Press “SET” button to set exercise pulse. The
setting values of 40-240 RPM , the consumer computer alarm when heart rate is above the SET
value.
NOTE
：
：
1.
If the display is faint or shows no figures ,please replace the batteries.
2.
The monitor will automatically shut off if there is no signal received after 4 minutes
.
CONSOLE
INSTRUCTIONS
14
Содержание MAG BIKE ABK2.0
Страница 3: ......
