background image

 

 

IMPORTANT SAFETY PRECAUTIONS

 

 

 

WARNING: 

Before starting any exercise program, consult with your physician or health professional

 especially a 

person who is above 35 years old or has some health problems. We take no responsibility for any troubles or injuries 

due to the reasons above. Don't power on until you finish assembling the treadmill and covering the protected top of 

the motor. 

 

ATTENTIONS: 

 

1. When using this treadmill, keep attaching the safety pull pin rope to your clothes or belt. 
 
2. Do not plug anything into any parts of this equipment as it may cause damage and a serious safety risk. 
 

3. Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may interfere with proper 
ventilation. 
Also, do not place the treadmill near water or outdoors. 

 
4. Never start the treadmill while you are standing on the walking belt. After turning the power on and adjusting the speed 
control, there may be a pause before the walking belt begins to move, always stand on the foot rails on the sides of the frame until 

the belt is moving. 
 
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing that could become caught 
in the treadmill. Always wear running or aerobic shoes with rubber soles. 

 
6. Keep small children or pets away from the treadmill during operation. 
 

7. Do not exercise for 40 minutes after a meal. 
 
8. This treadmill is designed and intended for use by adults. Any use by people less than adult age needs to be 

under strict supervision and at the risk of the user and supervisor. 
 
9. Always hold the handrails when initially walking or running on the treadmill, until you are familiar with the use of the treadmill. 

 
10. The treadmill is for indoors, do not use outdoors. Position the treadmill on a clean, level surface. 
Note: The treadmill is made with specialised equipment, please do not attempt to modify any of the original parts. 
 

11. The power cord of the motorised treadmill is specialised. If the power cord is damaged, please purchase it from distributor or 
contact our company directly. 
 

12. If the treadmill should suddenly increase in speed due to an electronics failure or the speed inadvertently increased, the 
treadmill 
will come to a sudden stop when the pull pin is disengaged from the console. 

 
13. Do not use an extension cord with this product. Keep the power cord clear from all moving parts. Do not place the power cord 
underneath the treadmill as it may become entangled and cause a serious safety risk. Ensure that the power cord is not near any 
high temperature. 

 
14. When the treadmill is not being used, the power cord should be unplugged and the safety pull pin removed. 
Note: The power cord of motorised treadmill made by special equipment, and if it is broken, please contact distributor quickly. 

 
15. The treadmill is for home use only. 
 
16. 

The treadmill maximum user weight is 

1

ͺ

0KG

 
17. 

Please do not overuse the treadmill so you can avoid any injury and do not use incorrect way for your safety. 

 

18. 

When the treadmill is not being used, please keep the safety pull pin in the safety place to avoid the other use.

Содержание JT8500



























Отзывы: