Bodyworx ABX190M, Руководство пользователя

Страница: 13 / 19

10
STEP 3

Remove the clamp (32) and allen screw (34) from front post (19), Attach handlebar (27)
to front post (19) and tighten with clamp (32) , allen screw (34), cover for clamp (26)
and T-type knob (31).

Through the hand pulse wires (60) from the small hole on front post and pull out from
the top bracket. Then connect it to the upper pulse wires (64). Connect the extension
sensor wire (21) to the upper sensor wire (29).

Attach computer (22) onto the bracket of front post (19), tighten with two screws (28)
which are pre-assembled on the back of computer.
27
19
28
34
32
26
31
60
29
64
22
21
STEP 4

Slide the seat (15) onto seat post (11), tighten with flat washer (14) and lock knob (59) .

Remove the quick release knob (30) from the main frame. Insert seat post (11) into
main frame (1). Line up the holes and secure seat in position with quick release knob
(30). The correct height for seat can be adjusted after the bike is fully assembled.
15
30
1
11
14
59
13