36
4.8 Measuring blood pressure and saving values
Wearing the cuff as described in chapter 4.7 press the
left
button
(START/STOP) briefly to start the measurement.
The PressureTel
™
inflates and then deflates in stages. After
successful measurement the display will show (example):
The reading number (here 27) flashes. The measurement is
stored automatically. If you do not want to store the value,
press the left button within 10 seconds.
4.9 Calling up previous blood pressure values
First, hold the
right button
(MENU) until the display flashes.
You will see the average value of the last 3 measurements,
shown by a flashing “
A
”.
Then press the
left button
(START/STOP). The reading and the
date/time of the last-stored measurement will now be shown
alternately.
Press the
left button
repeatedly to see the last (max. 99)
values on the PressureTel
™
.
Press the
right button
briefly or wait 30 seconds without
pressing a button, if you do not wish to call up any further
blood pressure values.
This is only possible in case you already have measured values in your
PressureTel
™
. If not the display will immediately go to the edit Time
and Date state after you pressed the
right button
.
4 Operating the device
Содержание PressureTel
Страница 1: ...Benutzerhandbuch User Manual...
