35
4 Operating the device
8.
Now your phone will ask for a
Bluetooth
®
password.
9.
Please immediately enter the password
6624
on your mobile phone and click "
OK
". A single short
"beep"
on the PressureTel
™
will confirm the correct code.
10.
After the "beep" please immediately perform a blood
pressure measurement as described in chapters 4.7
and 4.8.
i
Attention
: This measurement is part of the pairing process
and will NOT appear in your logbook.
11.
After another single "beep" of the PressureTel
™
the
BodyTel Mobile application on your phone will state that
the pairing process is now finished.
i
Note
: A successfully paired device will be listed on the
Device List
in the
BodyTel Mobile
application.
4.7 Putting on the PressureTel
™
Assemble the upper arm cuff as shown, with the label on the
outside. Now pull the cuff over your left arm, until the lower
cuff edge lies approx. 2 cm above the elbow joint.
The artery marking should be on the inside of your elbow.
To produce correct values, you should keep your arm, hand
and fingers still during the measurement.
Important note:
We recommend carrying out blood pressure measurements
after approx. 3–5 minutes sitting at rest.
Содержание PressureTel
Страница 1: ...Benutzerhandbuch User Manual...
