BODYSTATIC DK860CEU01AA, Руководство пользователя

Страница: 25 / 36

2017/12/5V1.4+V1.2 24
completes the target burned calories within limited time and reaches the goal, the
program will end automatically.
Setting Range: Calories Preset: 200 cal / Setting Range 40 - 600 / Unit: Cal
HRC
⚫
Hill Heart Rate Control
The preset heart rate goal is 80% of the maximum heart rate. The target heart rate
will be obtained based on user’s personal setting data. The column height represents
the percentage of the maximum heart rate. There are totally seven heart rate goals in
the program, among which, there are three varied goals, respectively being 70%, 75%
and 80%. The rest goals maintain 65% as the minimum limit. (See the following
figure).
After three minutes’ standard warm-up exercises, the heart rate will increase
until 70%. Keep this rate in the running for one minute and then decrease the speed
level to lower down the heart rate to 65% per minute. Each heart rate shall keep for 1
minute. The varied setting will operate in term during the program operation. When
run to the end of the exercise, program will enter into the cooling mode. During the
operation period, if the heart rate is out of the maximum rate for 45 seconds, the
stepmill will enter into the pause mode. And when heart rate does not reach to the goal
rate or changing between the two goal rates, then the system will increase or decrease
the speed. If the first heart rate goal is not able to reached, the program will enter to
next goal. During the exercise, please be sure the chest belt had wearing on correctly
or hold the hand pulse sensor tightly, otherwise the program could not operate
smoothly.