BODYSTATIC DK860CEU01AA, Руководство пользователя

Страница: 23 / 36

2017/12/5V1.4+V1.2 22
7.2. Heart rate monitor system
◼
A. Hand pulse sensor
Put hands on the steel sensor of the front handrail to detect the pulse system during
workout. Each handrail is equipped with two sensors. You must grip these four sensors
during workout, then the stepmill control board could catch the pulse signal. After 20 to 30
seconds, the result will display.
When the stepmill speed is over than 60 SPM, it is suggest to use the chest belt heart rate
sensor instead of the hand pulse sensor.
◼
B. Chest belt heart rate sensor
Heart rate monitor system includes chest belt heart rate sensor which should be make
electrode detect on human body. Use the wireless technology to transmit the heart rate
signals to the control board. Chest belt is not the necessary attachment. You can purchase
if you need
Figure: Electrode position and wearing method of chest belt
The figure shown above demonstrates the positions of central electrodes of the chest belt
and the instruction for use. Electrodes are located at the grooves on both sides of the
center of the inner side of the belt. The electrodes must be kept moist when in use to
transmit the heart beat signals to the receiver more accurately. Keep the chest belt under
the pectoral muscle when in use and adjust the chest belt to a snug fit for smooth breathing.
The direct contact of electrodes and skin provides the best efficiency of heart rate
monitoring, however, wearing a thin, damp shirt can reach the same results as well. If