BodyMedia FIT Armband and Display Manual
BodyMedia FIT Armband and Display Manual
3 Vrms
150 kHz to
80 MHz
3 V/m
80 MHz to
2.5 GHz
3 Vrms
150 kHz to
80 MHz
3 V/m
80MHz to
2.5 GHz
Portable and mobile communications equip-
ment should be separated from Armband
and Display by no less than the distances
calculated/listed below:
D=(3.5/V1)(Sqrt P)
D=(3.5/E1)(Sqrt P)
80 to 800 MHz
D=(7/EI)(Sqrt P)
800 MHz to 2.5 GHz
Where P is the max power in watts and D is the
recommended separation distance in meters.
Field strengths from fixed transmitters, as
determined by an electromagnetic site survey,
should be less than the compliance levels
(V1 and E1).
Interference may occur in the vicinity of equip-
ment containing a transmitter.
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
The Armband and Display are intended for use in the electromagnetic environment
specified below. The customer or user of the Armband and Display should ensure
that it is used in such an environment.
Guidance and Manufacturer’s Declaration - Emissions
IEC 60601
Test Level
Compliance
Level
Electromagnetic
Environment - Guidance
Immunity Test
26
0.1
0.3689
0.3689
0.7378
The Armband and Display are intended for use in the electromagnetic environment
specified below. The customer or user of the Armband and Display can help prevent
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF Communications Equipment and the Armband and Display as recommended
below, according to the maximum output power of the communications equipment.
Recommended Separation Distances for the Product
0.01
0.1166
0.1166
0.2333
Separation (m)
150kHz to 80MHz
D=(3.5/V1)(Sqrt P)
Separation (m)
80 to 800MHz
D=(3.5/V1)(Sqrt P)
Separation (m)
800MHz to 2.5GHz
D=(7/E1)(Sqrt P)
Max Output
Power (Watts)
1
1.1666
1.1666
2.3333
10
3.6893
3.6893
7.3786
100
11.6666
11.6666
23.3333
27
