BodyMedia FIT Armband and Display Manual
BodyMedia FIT Armband and Display Manual
Flicker
IEC 6100-3-3
N/A
Harmonics
IEC 6100-3-2
N/A
The Armband and Display are suitable for use in all
establishments, including domestic, and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
RF Emissions
CISPR 11
Class B, Group 1
The Armband and Display use RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby
electronic equipment.
The Armband and Display are intended for use in the electromagnetic environment
specified below. The customer or user of the Armband and Display should ensure
that it is used in such an environment.
Guidance and Manufacturer’s Declaration - Emissions
Emissions Test
Compliance
Electromagnetic Environment - Guidance
Computer and Wireless Communicator
1.5m
Diagram not to scale.
1.5m
1.5m
2.5m
User Environment
24
Power frequency magnetic fields should
be that of a typical commercial or hospital
environment.
Mains power quality should be that of a
typical commercial or hospital
environment. If the user of the Armband
requires continued operation during power
mains interruptions, it is recommended that
Armband and Display be powered from an
uninterruptible power supply or battery.
Mains power quality should be that of a typi-
cal commercial or hospital environment.
Floors should be wood, concrete, or ceramic
tile. If floors are synthetic, the r/h should be
at least 30%.
Electromagnetic
Environment - Guidance
3A/m
Power
Frequency
50/60Hz
Magnetic Field
IEC 61000-4-8
3A/m
N/A
Voltage Dips/
Dropout
IEC 61000-4-11
>95% Dip for
0.5 Cycles
60% Dip for 5 Cycles
30% Dip for 25
Cycles
>95% Dip for 5
Seconds
N/A
s
±1kV Differential
±2kV Common
N/A
EFT
IEC 61000-4-4
±2kV Mains
±1kV I/Os
The Armband and Display are intended for use in the electromagnetic environment
specified below. The customer or user of the Armband and Display should ensure
that it is used in such an environment.
Guidance and Manufacturer’s Declaration - Immunity
±6kV Contact
±8kV Air
ESD
IEC 61000-4-2
±6kV Contact
±8kV Air
Immunity Test
IEC 60601
Test Level
Compliance
Level
25
