BIKES – OWNER’S MANUAL
20
2.14. AUTO POWER OFF OPTION
The Auto Power Off feature saves energy by automatically turning off the display after a designated amount of time of “no
action”. Never allowing the display to go into AUTO POWER OFF mode will not affect the life cycle of the LCD screen.
To modify the period of time before the AUTO POWER OFF feature turns off the display enter the SETTING Menu (see
section 2.1).
1. Select the AUTO POWER OFF option and press the
JustGo
TM
key to access it.
2. You can choose a delay from 0 to 30 minute(s) using the
INCREASE/DECREASE SEGMENT
keys
.
Selecting 0 means
the display will always stay ON.
3. Press the
JustGo
TM
key to validate your choice.
2.15. INTENSITY LEVEL OPTION (LOW, MEDIUM or HIGH)
The default intensity level menu allows you to set the default intensity to either LOW, MEDIUM OR HIGH.
Setting this feature to LOW will set the maximum to 200 WATTS at 60 RPM.
Setting this feature to MEDIUM will set the maximum to 300 WATTS at 60 RPM.
Setting this feature to HIGH will set the maximum to 400 WATTS at 60 RPM.
Note that the factory setting for this feature is MEDIUM.
1. To access this menu, you have to enter onto the SETTINGS menu, choose INTENSITY and press
JustGo
TM
.
2. Use the SEGMENT INCREASE OR DECREASE keys to set the desired intensity and press
JustGo
TM
. Press the STOP
key to exit this menu.
The machine will now be set on the desired intensity.
NOTE
– If the USER ID feature is ON, the intensity level chosen in the USER ID menu by the USER will override this
selection.
2.16. PRESET INTENSITY LEVEL KEYS (A & B)
The two
PRESET LEVEL
keys store preset level of effort or level of resistance values in memory. Those keys allow a user to
recall those preset levels during a program. This is especially interesting for users who wish to change quickly from one level
of effort to another (such as in
Interval training
) without having to hold down the increase or decrease segment buttons until
they reach the desired level.
To store values on the Preset Level buttons, adjust the bike to the desired level and then press either the A or B button for 1
second. The selection will be confirmed by a beep and the value stored on the selected button.
NOTE
– If the USER ID feature is ON, the stored Preset Resistance values will be saved under that user’s ID for their next
workout. If no USER ID is selected then the values will be lost when the program is stopped (When you are back to the
Welcome Screen).
2.17. USER ID KEY
The
USER ID
key allows users to quickly select a User ID prior to a workout. This feature helps speeding up the
entry data (age, weight, gender and preferred Intensity level) in a program setup which results in more accurate
caloric expenditure results. The User ID feature will also cumulate individual statistics and allow the user to review
their totals.
The
USER ID
key contains the following sub menus: USER ID NAME #1 to #8 (if applicable), CREATE USER, EDIT USER,
DELETE USER and USER ID OFF.
Содержание R6X
Страница 2: ......
