BodyCraft SW-95.0225-G Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 58

background image

34

Elite

Step 2:

Assemble Base Frame

1. Attach the Base Frame (401) to the Connecting Rear Stabilizer (402), using two 1/2” X 5” Hex Bolts

(426), two 1/2” Washers (438).

2. Insert the 25mm Dia Axle (408) into the Leg Press Support (403), then attach to the Base Frame

(401) using two Collars (409) {inside bracket of Leg Press Support (403)}, two 1/2” X 3/4” Hex

Threaded Bolts (427) and two 1/2” Washers (438). Tighten the bolts and cap with two End Caps

(421).

3. Insert the 3/4” Dia Axle (407) and two Bushings(410) into the top hole in the Leg Press Support

(403), then attach to the Foot Plate (404), using two 1/2” X 3/4” Hex Threaded Bolts (427) and two

1/2” Washers (438). Tighten the bolts and then cap with two End Caps (421).

4. Attach Seat Handles(406) to the Base Frame (401), using two 3/8” X 3-1/4” Hex Bolts (431), four

3/8” Washers (439), and two 3/8” Nylon Nuts (440). Tighten these bolts.

5. Attach Seat Pad (415) to the Base Frame (401), using two 3/8” X 2-3/4” Hex Threaded Bolts (432)

and two 3/8” Washers (439).

6. Attach Back Pad (414) to the Back Pad Adjuster (405), using two 3/8” X 1” Inner Hex Screws(435)

and two 3/8” Washers (439). Then slide the Back Pad Adjuster (405) into the Base Frame (401) and

lock at your desired position using the Spring Knob (425).

«
...
32
33
34
35
36
...
»

Содержание SW-95.0225-G



























































Отзывы:

Нет отзывов

Похожие инструкции для SW-95.0225-G

Бренд: ParaBody Страницы: 3

Бренд: Xterra Страницы: 28

Бренд: Cap Strength Страницы: 18

Бренд: ParaBody Страницы: 6

Бренд: Body Solid Страницы: 24

Бренд: Pro-Form Страницы: 20

Бренд: Weider Страницы: 1

Бренд: Weider Страницы: 8

Body Works Pro 2.0

Бренд: Weider Страницы: 12

ab GLIDER PLATINUM

Бренд: Pro-Form Страницы: 16

Бренд: Pro-Form Страницы: 20

Бренд: Pro-Form Страницы: 24

Бренд: Pro-Form Страницы: 33

Бренд: XMark Fitness Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды