background image

Product Safety

1

Basic precautions should always be followed, including the following safety

instructions when using this equipment:

Read all instructions before using this equipment.

1. It is recommended that you perform warm up exercises before using this equipment.
2. Please make sure all components are not damaged and in working order before use.
3.  This equipment should be placed on a flat surface while in use. Using a mat or other

material on the ground is recommended.

4.

  Please wear proper clothes and shoes when using this equipment; do not wear clothes

that might catch in any part of the equipment.

5.  Do not attempt any maintenance or adjustments other than those described in this

manual. Should any problems arise, discontinue use and consult an Authorized Ser
vice Representative.

6. Use caution when stepping on and off the machine. During the workout it is

recommended that you always hold onto the stationary or upper body handle bars. To
ensure the pedals run smoothly, you may need to push or pull on the upper body
handlebars first, then follow with the leg motion.

7.  Do not use the equipment outdoors.
8.  This equipment is for household or light commercial use only.
9.  Only one person should be on the equipment while in use.
10. Keep children and pets away from the product while in use. This machine is designed

for adults only. If you feel any chest pains, nausea, dizziness, or shortness of breath,
you should stop exercising immediately and consult your physician before continuing.

11. If you feel chest pains, nausea, dizziness, or shortness of breath, you should stop ex

ercising immediately and consult your physician before continuing.

12. The maximum weight capacity for this product is

300

 lbs /

135

 kgs.

WARNING:

Before beginning any exercise program consult your physician.
This is especially important for the persons who are over 35 years
of age or who have preexisting health problems. Read all
instructions before using any fitness equipment.

CAUTION:

Read all instructions carefully before operating this product.

Retain this Owner’s Manual for future reference.

Содержание SCT400g






























Отзывы: