BodyCraft SCT400g Скачать руководство пользователя страница 8

Страница: 8 / 29

Assembly

4. UPRIGHT POST INSTALLATION

4.1

Lift up the Upright Post (A02) and connect the Cable I (D17 and D07) from Upright Post to the

Cable II (D18 and D08) from Main Frame (A01). then slide the extra length of cables into opening
hole of Main Frame (A01)

4.2

Slide the wires into the opening hole of Main Frame (A01) carefully and use

Four

M8 Screws

(B05) by fingers first for aligning the punched holes and threaded holes.

[Tighten screws with the Hex Tool with Phillips Screw Driver provided.]

Attention:

Do not pinch cables.

5. ADJUSTING THE ADJUSTABLE FOOT PADS

5.1

Adjust the Adjustable Foot Pads (C05) on the Main Frame (A01) as needed to level the Seated
elliptical trainer

5.2

The Seated elliptical trainer has to be leveled to prevent from wobble or shaking during the

exercise.

[Tighten screws with the Hex Tool with Phillips Screw Driver provided.]

6. UPPER HANDRAIL TUBE INSTALLATION

6.1

Assemble the Upper Handrail Tube (A12/A13) into the Handrail Arm (A08/A09) with

Two

Bolts (B06),

Two

M8 Curve Washers (B07) and

Two

M8 Nylon Nuts (B08).

6.2

Refer above step to assemble left side part..

6.3

Connect all connectors (D05/D06) from L/R Upper Handrail (A12/A13) to the matching
connectors (D10/D11) from Handrail Arm (A08/A09)

[Tighten screws with the Hex Tool with Phillips Screwdriver provided

Attention:

Do not pinch cables.

C05

A01

B05

D06

D11

D05

D10

A13

A12

A08

A09

B06

B07

B08

Содержание SCT400g






























Результаты поиска

Содержание SCT400g

Отзывы:

Похожие инструкции для SCT400g

Бренды по названию

Популярные бренды

BodyCraft SCT400g, Руководство пользователя

Результаты поиска

Содержание SCT400g

Отзывы:

Похожие инструкции для SCT400g

Бренды по названию

Популярные бренды