17
STEP 10 INSTALL CONNECT CABLE
CONNECT CABLE (85)
C1
C2
C4
Threaded End
Threaded End
C3
C6
C5
C1
24
101
146
147
1
4
C3
101
147
146
23
T10
C4
101
147
146
25
C5
C6
C2
T9
147 100
101
82
4
142
1. Screw the threaded end of Connect Cable (85) into the Single Pulley Block (24) and route the cable
up and over pulley C2 mounted on Top Frame (4), using one 3/8" X 55L Flat Pin Bolt (142) and M6 X
12L Male Screw (147) as shown in Figs. C1 and C2..
2. Route the cable down and around pulley C3 mounted on the Main Frame (1), using one 3/8" X 30.5L
Flat Pin Bolt (146) and M6 X 12L Male Screw (147).
3. Continue to route cable up and around the pulley C4 mounted at second hole of Adj. Pulley Block
(23), using 3/8" X 30.5L Flat Pin Bolt (146) and M6 X 12L Male Screw (147).
4. Route the cable down and around pulley C5 mounted in the top of the Double Pulley Block (25) using
one 3/8" X 75L Flat Pin Bolt (141) and one M6 X 12L
Male Screw (147). Finish by routing the cable up to
screw into the threaded receptor welded to the Top
Frame (4).
