Hardware Required
Assembly Step 5
C
A.) Adjustable Ankle Brace Assembly
Take the illustrated assembly which is composed of parts (#06),
(#04) and (#31) out of the box. Pull up the
Ankle Brace Lock Pin
(#31)
as illustrated and, at the same time, pull the
Adjustable
Ankle Brace (#06)
out of the
Height Adjustment Tube (#04)
SLOWLY. (You will notice that there is a spring that pulls downward
as you pull the
Adjustable Ankle Brace (#06)
out). After you get
the
Adjustable Ankle Brace (#06)
out completely, rotate it 90
degrees clockwise so that the holes face toward the
Ankle Brace
Lock Pin (#31)
. Insert the Adjustable
Ankle Brace (#06)
back into
the
Height Adjustment Tube (#04)
, then release
Ankle Brace
Lock Pin (#31).
B.) Foam Tube Assembly
Slide the
Foam Tube (#12)
through the
Height Adjustment Tube
(#04)
. Then secure this assembly by using a
Hex Bolt (#43)
, two
Washers (#47)
and one
Nylon Nut (#49)
as illustrated. Slide the
two
Foam Rollers (#25)
onto the
Adjustable Ankle Brace (#06)
and another two
Foam Rollers (#25)
on the
Foam Tube (#12)
.
C.) Adjustable Foot Frame Assembly
Remove the
Knob Bolt (#35)
from the
Height Adjustment Tube
(#04)
and set it aside. Slide the
Adjustable Foot Tube (#05)
into
Height Adjustment Tube (#04)
and secure it with the
Knob Bolt
(#35)
. The
Adjustable Foot Tube (#05)
is designed to accommodate
different shoe sizes by moving up for smaller feet and down for large
feet. Please adjust it to accommodate your foot size accordingly
before inverting. (ALWAYS WEAR ATHLETIC SHOES BEFORE
INVERTING)
Bolt
#43. Hex Bolt (M6x45 mm)
[1 Piece]
Washer
#47. Washer (M6)
[2 Pieces]
Nut
#49. Nylon Nut (M6)
[1 Piece]
B
A
Assembly Instructions
IT9910
Page
9
C
