4
The hair removal equipment can only be placed in the original packaging box for
transportation and storage, to avoid damage. Hair removal equipment should be stored
existing ventilation, drying, temperature of 5
℃
to 35
℃
, environment relative humidity not
more than 70%, avoid the acid, alkali and corrosive substance pollution, to avoid strong
sunlight, transport to avoid severe large amplitude vibration, is strictly prohibited to rain or
excessive isolation, is strictly prohibited throw.
3. Installation
3.1 Delivery and installation
The machine should be installed by representative from Beijing Kiers Company, or
pointed service agent, and responsible for site testing and acceptance.
3.2 Take the machine out of the box and Confirm
The machine has been packed strictly before send from factory, please check carefully if
the packing damaged, and check if all accessories are inside, and please keep all packaging
materials. They are needed when you need to deliver the machine.
3.3 Request for the working room
In addition to the warning signs, when working with 4 type’s lasers, the working room
should be set up with a laser work warning.
3.3.1
Entrance Notice
There should be strict mark at each entrance
There should be laser safety warning signs in every gate, must indicated the laser
wavelength;
There should be laser warning lights in every entrance
，
the lights should be turned
on once the laser machine turned on, this is to avoid somebody enter the room
when the machine is working
3.3.2
Laser radiation protection for windows
During working, the laser beam should be prohibited to pass through the window of the
working room, because it’s dangerous.
3.3.3
Prevent laser reflection
Laser work should ensure that no high reflective material properties, such as mirrors,
glass, etc., in order to prevent the laser beam generated by the reflection of the laser
