12
8.2 Add water
Filling deionized cooling water: there is no deionized cooling water when use it at
first time, so before open the machine, we should fill the deionized cooling water into the
device.
1) Take out the water pipe, and then insert the butt joint into the water outlet of the
bottom right of the back of the machine.
2) Water pipe is upright, deionized water will be added slowly from funnel.
Notice: Don’t fill the water quickly to prevent the water spill over.
3) When filling the deionized cooling water, please notice the change of the water
level. When the water spill over from the water level window, please stop filling, and take
off the water pipe, clean the residual water.
4)
●Notice:
when using the machine at first time, there is no water in the water pump
、
refrigerator and the water route, so after opening the machine, the water level in water
tank will go down, there will be warning on the screen. So the deinoized cooling water
need to be put into the device again until don’t warn.
