Page 8
With the help of an assistant, attach the
Top Upright (#01)
onto the
Left/Right Uprights (#02).
Attach the
Center Cross Tube (#06)
to the
Top Upright (#01)
and
Left/Right Uprights (#02).
Secure
them together using two
Reinforcement Plates (#15)
, four
Hex
Bolts (#19)
and four
Nylon Nuts (#23)
-- all as shown and oriented
Attach the
Supporting Tube (#05)
to the
Center Cross Tube
(#06)
and
Rear Base (#04).
Secure
Supporting Tube (#05)
to the
Center Cross Tube (#06)
using two
Hex Bolts (#18),
two
Washers
(#21)
and two
Nylon Nuts (#23).
Secure
Supporting Tube (#05)
to the
Rear Base (#04)
using two
Hex Bolts (#19),
two
Washers
(#21)
and two
Nylon Nuts (#23).
Attach the
Foot Tube (#07)
to the
Supporting Tube (#05),
secure
them together using two
Hex Bolts (#18)
two
Washers (#21)
and
two
Nylon Nuts (#23).
Secure the product using one
Knob Bolt (#14A)
through one
Washer (#22).
PT817 / PT890
NOTE:
For easier assembly, only hand tighten the Nuts
& Bolts for now. After all parts have been put in
place, then proceed to tighten with a wrench.
Assembly Step 3
Hardware Required
#21. Washer (M10)
[6 pieces]
#22. Big Washer (M8)
[1 piece]
Nut
BOLT
#18. Hex Bolt (M10x45 mm)
[4 pieces]
#19. Hex Bolt (M10x70 mm)
[6 pieces]
Washer
#23. Nylon Nut (M10)
[10 pieces]
Assembly Instructions
in illustration.
A
