Body Champ PBC1835, Руководство пользователя

Страница: 14 / 20

PBC1835 Page 12
Assembly STEP 5
With the help of an assistant, attach the Pull-Up Bar (#11) to
the two Upright Frames (#16) . Secure them together using
four Hex Bolts (#22) , four Big Washers (#27) and four Nylon
Nuts (#30) as shown in the diagram.
At this point, secure ALL the hardwares that were hand
tightened in previous steps with appropriate tools.
NOTE:
FLOOR ANCHORS This piece of
equipment includes four (built-in)
Floor Anchors that allow the user to
mount the equipment to the floor.
Floor mounting is optional but highly
recommended as it increases stability
in pieces of equipment that are used
often or used with heavy weight.
Mounting hardware is
NOT PROVIDED, but can easily be
obtained at your local hardware store.
Consult with the hardware store
personnel to help you selecting the
proper type of hardware for your type
of installation, whether it be into
concrete, a wooden subfloor, etc.
Hardware Required
THE ASSEMBLY PROCESS IS NOW COMPLETE.
However, for your own safety, please make sure to read this entire Owner’s Manual which includes
safety instructions and warnings, as well as any safety/warning labels affixed to the product before use.
For your safety , please visually and functionally inspect and test the unit after assembly is complete.
#27 Large Washer (M10)
[4 Pieces]
#30 Nylon Nut (M10)
[4 Pieces]
#22 Hex Bolt (M10X80mm)
[4 Pieces]