BODY BIKE SMART+, Инструкция по эксплуатации

Страница: 18 / 32

ADJUSTMENT HANDLE VERTICAL
Figure 15 Figure 14
The vertical adjustment handles doesn’t need cleaning,
but with time they need to be tightened in order to
keep the posts in position. In order to do so a 6mm
Allen wrench is needed.
Front post adjustment
1) Open the service hatch as shown in figure 23.
2) Locate the adjustment bolt, just above the control
box. See figure 14.
3) Use a 6mm Allen wrench to tighten the front post.
4) Lock the adjustment handle and validate if the
front post is fixed. Continue until it is fixed in position.
Saddle post adjustment
1) Push the 6mm Allen wrench into the hole at the
back of the bike. Tighten carefully.
2) Lock the adjustment handle and validate if
the saddle post is fixed. Continue until it is fixed in
position.
Control
box
Adjustment
bolt
Adjustment
bolt
Saddle
post
Flywheel
018