BODY BIKE SMART+, Инструкция по эксплуатации

Страница: 16 / 32

Every 3 months the handles need
cleaning and vaseline oil to protect
the parts from sweat, dust, dirt, salt
and water.
1) Remove the front end-cap bye
releasing the two 4mm bolts. See
figure 11
2) Release resistance and push the
sled forward. The letter
K
Should be
above the line as shown in figure 11.
3) Unscrew the 8mm bolt from
below. This enables you to slide off
the handlebar from the sled. See
figure 11.
4) Remove the handlebar, 8mm
bolt, brake plate and plastic tube.
See figure 13
5) Clean every part if necessary.
Clean also inside the aluminum
sled. Do not use any kind of grease
inside the sled.
6) Check if the brake plate and 8mm
bolt are fine. If not replace
these parts.
7) This is optional . Use vaseline
oil on top of the front post sled.
Apply sparingly.
8) Reassemble the slep by
pushing the brake plate into
the front post alu profil. Place it
above the hole.
9) Insert the 8mm bolt from
ADJUSTMENT HANDLE HORIZONTAL
PLEASE NOTE
Never use grease or vaseline oil on
the Brake plate. See figure 13.
!
Figure 11
End cap
Front post
sled
016