BODY BIKE SMART+, Инструкция по эксплуатации

Страница: 13 / 32

A
SSEMBL
Y
PEDALS
1) Place the right pedal arm with the socket
pointing upwards, see figure 9.
2) Put maximum resistance on the brake, so the
pedal arm is unable to rotate, see figure 8.
Please note
The pedals are marked with R for Right and L
for Left side.
The pedals should always be screwed on in the
direction of the handlebar, see figure 10 and 11.
Make sure that the hole in the pedal arm is
greased when mounting the pedal.
Start mounting the pedal by hand as tools will
tighten the pedal at a wrong angle.
3) After tightening by hand, use a 15mm ped-
al wrench to tighten the pedal completely
(45N/4,5kg).
!
Figure 8
Clockwise will increase
the resistance
Counterclockwise will
loosen the resistance
013