10
V
– Location of the "S" and "+" keys
1) These two keys are located on the back of the clock:
–
Right side: when viewed from the back
–
Left side: when viewed from the front (when being handled)
2) The “S” key is above the “+” key.
3) When pressed, an LED lights up to indicate the selected key.
Example showing the two keys pressed simultaneously:
VI
– Style 5S and Style 10S – Timer mode
1) The timer keypad operates in count or countdown modes.
It has the following functions: start, stop, split time, closure of a dry contact when the count or
countdown ends (stops at a pre-programmed time).
The timer keypad can control up to ten Style 5S or Style 10S clocks.
The electronic board for Style 5S and Style 10S clocks is fitted with a connector strip (
j
).
2) Connect the timer keypad to the strip (
j
) using a 4-core cable (T-, T+, 0V and 15V) for the first
clock.
Wiring example using three Style 5S clocks (synchronisation via impulses):
3) To link several Style 5S or Style 10S clocks to a single timer keypad, connect the T- and T+
terminals together using a 2-core cable (twin telephone cable). The first clock remains connected to
the timer keypad via a 4-core cable.
4) For more information, please refer to the timer keypad instructions.
EN
0V
0V
Green
Yellow
White
Brown
8/10 cable, twin pairs (unshielded)
20 m
max.
15V
15V
T+
T+
T-
T-