background image

Junghans MEGA alarm

  (type 150 / 1030.00, ca. 1987) 

Short user manual.

  

I did not find anything on the net, and have  
mislaid my manual, so I tested things out by  
myself! © Thomas, OH6NT - 2016 

Snooze-button (5 mins.)

 

Pressing this more than 6 

seconds 

resets ALL

 

settings! 

Alarm time setting

 

Press “set” once, set 

alarm time with 

+

  

and 

. Press “set” 

again to finish.  

Postpone alarm 

for 24 hrs when it 

sounds (to same 

time next day). 

Activate 

or 

deactivate 

alarm 

completely. 

Setting time zone: 

(If you do not change the time zone, the clock will show the time UTC+1) 

- Press “set” button and keep it depressed. (AL blinks instead of day) 
- Press “24 h off” until hour number starts to blink. 
- Let go of the “set” button, but keep pressing “24 h off”. 
- Set your difference from German time (UTC-1) time with “

+

” and “

 “

 

buttons. 

- Let go of the “24 h off” and clock should show actual time at your location. 

NB!

 This can only be done when time is running, i.e. clock actually shows time.  

Setting display language:

 

- Remove battery 
- Press and hold “

+

” for English, “

 “ for French or nothing for German day display 

- Insert a fresh AA-size 1,5 V battery, observe polarity. 
- Let go of the button you are holding. The display should show E, F or D accordingly 

NB!

 This can only be done when battery is inserted!  

General verdict:

 

This is a very reliable clock, I have had mine for 30 + years. As long as you live closer than about 2000 
km from the DCF77 transmitter in Mainflingen in Germany, the clock will synchronize every hour with 
the atomic master clock in Braunschweig (depending on placement and radio wave propagation).  
A number might show up below the day indicator; that tells how many times the synchronization has 
failed. The clock tries synchronization every hour at 58 minutes and changes automatically between 
summer and winter time. 

An alkaline battery should last for a couple of years. Test the battery with a short push on the green 
“Snooze”-button; if the display is properly lit up, the battery is good. If the light is weak, exchange the 
battery observing the polarity.  More info on DCF77 here: 

https://en.wikipedia.org/wiki/DCF77

.  

Reviews: