33
IV.8 Displaying a numerical value
A numerical value can be displayed by selecting alternation “F” in manual mode
or via a PC serial link.
Note: if both input modes are used (manual and via serial link), the value actually
displayed will always be the last value entered.
Note 2: additional instructions are enclosed in the packaging for entering values via a
PC serial link.
1. Press the [R] button for 3 seconds to go to the numerical
value menu.
2. The first digit flashes; modify with the [R] button.
3. Press the [S] button to validate and move on to the second
digit.
4. The second digit flashes; modify with the [R] button.
5. Press [S] again to validate and move on to the center Led
module.
6. The module blinks, select « : », « . » or « » with the [R]
key.
7. Press the [S] button to validate and move on to the fourth
digit.
6. The third digit flashes; modify with the [R] button.
7. Press the [S] button to validate and move on to the fourth
digit.
8. The fourth digit flashes; modify with the [R] button.
9. Press the [S] button to validate. The readout returns to
normal mode.
