20
[Sel] pushbutton (inside clock only)
- Long press (1 second) to access the programming menu (Time/Prog/Tech/
Test).
- When in a menu, long press (1 second) to exit from the menu.
- Short press to validate the previously selected menu or parameter.
[S] pushbutton (HF remote control only)
- In a menu, press briefly to exit from the menu.
- Press briefly to validate either the menu or the previously selected parameter.
- In timing mode, press to start the chronometer and press again to stop it.
[R] pushbutton
- Short press to select the next menu or parameter.
- In timing mode, press to reset the chronometer when it is stopped.
- Hold down (for 1 s) to access a value programming menu.
[M] pushbutton
- Hold down (for 1 s) to access the programming menu (chrono / time / info/
prog / tech / test).
[T] pushbutton
- Hold down (for 1 s) to perform a display test and display the EPROM version
number.
General information on console and board buttons
- If no button is pressed for 30 seconds when entering data, the menu is exited
automatically without validating any modified parameter. A parameter is not
validated until the [S] button is pressed.