30
The same procedure is then repeated for
the other side so that the panels are com-
pletely mounted on the lying surface.
The chassis of the stellar comfort/nursing
care bed is also fitted with a panel cover-
ing. The first step here is to mount the side
panels. These side panels are equipped
with two different mountings. The U brack-
ets (8) can be attached to the mountings
(9) on the chassis provided for this pur-
pose. The panel must thereby be pushed
down as far as possible.
Attention: The unneeded long mounting,
shown here in the right Fig. is pointing to
the foot end!
The second panel can then be mounted on
the chassis.
The last panel (10) for the chassis is in-
serted on the foot side. There are two black
wedges (11) located on this panel, which
are used for fixing and connecting the side
panels. Slide the wedges evenly over the
holders (12) provided for this purpose, and
push the panel downwards in the direction
of the arrow.
Ensure that all panel are positioned at the
same height. If this is not the case, the
screws on the brackets can be loosened
slightly, and the panels can be brought into
the appropriate positions. Afterwards,
tighten the screws of the brackets again.
