24
stellar becomes operational
Remove all packaging from the com-
fort/nursing care bed and place the chassis
on a free level surface.
.
Place the cross beam (1) including the con-
troller on the chassis (2).
Pay attention to the head and leg end.
On the left side of the Fig. you can see the
mountings for an end piece, and these are
to be placed in the head area. On one side
of the cross beam, a receiver is visible un-
der the sheet metal cladding. This must
also be aligned on the head side.
Place the cross beam on the chassis so that
the holes are on top of each other. Fasten
the lying surface with the 4 screws (3) sup-
plied (cylinder head screws M8x55) and
the 4 nuts.
Place the lying surface on the cross beam.
Pay attention to the head and leg end.
On the left side of the Fig. you can see the
mountings for an end piece, and these
must be placed in the head area of the lying
surface.
The strips of the lying surface can be re-
moved for the assembly.
Slide the lying surface on the chassis so
that the holes are aligned on top of each
