BOCK belluno Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 68

BOCK belluno Скачать руководство пользователя страница 31

31

Important: The beds are not equipped with any particu-
lar connections that provide for a potential equalization.
Electrical medical devices connected to the patient´s
intravascular or intracardiac system must not be used.
The operator of the medical device shall be responsible
for the conformity of the combination of the devices with
the requirements of DIN EN 60601-1-1.

Particular features:

livorno, livorno low and livorno hydraulic stand out for their

advanced technology and can be perfectly integrated into home

environments owing to the vast offer of decoration elements.

The beds are available with a lying surface which provides both

4 or 5 different adjustment functions. The electrical adjustment

of the lying surface´s back rest can be done by means of the

hand control. In case of the 4- resp. 5-sectioned lying surface, the

electrical control of the back- and leg part takes place by means

of the hand control including its automatic triple function.

Getting livorno / livorno low / livrono hydraulic ready for use:
Please remove all packaging from the health care bed before car-
rying out the assembly.

1. Remove all connections toward the transport packaging

2. Position the base frame including its scissor mechanism

and lock the castors. For simplification reasons, it is
recommended to adjust the scissors to knee-height after
you have connected to the lying surface motor.

3. When mounting the unpartitioned lying surface, just

insert the ball bearings positioned at the top section of
the scissors into the provided u-channel at the bottom
section of the lying surface. Now remove the spring cot-
ter pin from the base frame. Use the bolt to adjust the
lying surface between the two brackets. Use the spring
cotter pin to protect the bolts against unfastening.

4. The net cable has to be fastened to the lying surface with

the provided pull relief. Connect the mains plug and the
actuators to the lying surface motor

5. Mount the side panneling of the frame with the provided

screws on the longitudinal lying surface frame bar.

The livorno hydraulic is to be assembled in the same way, only
without the electronic equipment.
Further mounting steps as decribed in chapter 5.7.

«
...
29
30
31
32
33
...
»

Содержание belluno





































































Отзывы:

Нет отзывов